|
ANSI N13.1 |
Guide to Sampling Airborne Radioactive Materials in Nuclear Facilities-No longer an ANSI Doc is now an HPS ASC N13 |
|
ANSI Z88.2 |
Respiratory Protection |
|
API MPMS 14.3.1 |
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 1 - General Equations and Uncertainty Guidelines-Third Edition; Errata - 1991; Errata - 1993; Replaces API MPMS |
|
API MPMS 14.3.2 |
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement; Section 3 - Concentric, Square-Edged Orifice Meters; Part 2 - Specification and Installation Requirements-Fourth Edition; AGA Report No.3, Part 2 and GPA 8185-00, Part |
|
API MPMS 14.3.3 |
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 3 - Natural Gas Applications |
|
API MPMS 14.3.4 |
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 4 - Background, Development, Implementation Proc. and Subroutine Doc.-Third Edition; Replaces API MPMS 14.3; AGA |
|
API RP 13B- 1 |
Recommended Practice Standard Procedure for Field Testing Water- Based Drilling Fluids-Third Edition; ANSI/API 13B-1/ISO 10414-1 |
|
API RP 1604 |
Closure of Underground Petroleum Storage Tanks |
|
API RP 1615 |
Installation of Underground Petroleum Storage Systems |
|
API RP 1632 |
Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems |
|
API RP 2200 |
Repairing Crude Oil, Liquefied Petroleum Gas, and Product Pipelines |
|
API STD 1631 |
Interior Lining and Periodic Inspection of Underground Storage Tanks- Fifth Edition; Supersedes RP 1631-1997 |
|
API STD 2015 |
Requirements for Safe Entry and Cleaning of Petroleum Storage Tanks-Sixth Edition |
|
ASHRAE 34 |
Designation and Safety Classification of Refrigerants-Includes ANSI/ASHRAE addenda listed in Appendix C; Addendum O: 10/03/2004 |
|
ASME B31.3 |
Process Piping |
|
ASME B31.3 INTERPRETATIONS |
Interpretations to B31.3-1999 Process Piping-Includes Interpretations No. 1 Through 18 |
|
ASME B31.4 |
Pipeline Transportation Systems for Liquid Hydrocarbons and other Liquids |
|
ASME MFC- 3M |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi- Date of Issuance: 8/15/2005 |
|
ASME MFC- 4M |
Measurement of Gas Flow by Turbine Meters |
|
ASME MFC- 6M |
Measurement of Fluid Flow in Pipes Using Vortex Flowmeters |
|
ASME MFC- 7M |
Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles |
|
ASME NQA- 1 |
Quality Assurance Requirements for Nuclear Facility Applications |
|
ASME PTC 19.10 |
Part 10: Flue and Exhaust Gas Analyses Instruments and Apparatus |
|
ASME PTC 4 |
Fire Steam Generators-Revision of ASME PTC 4.1-1964(R1991) |
|
ASME PTC 4.2 |
Coal Pulverizers |
|
ASME Y14.5.1M |
Mathematical Definition of Dimensioning and Tolerancing Principles |
|
ASME Y14.5M |
Dimensioning and Tolerancing |
|
ASQ Q9001 |
Quality Management Systems - Requirements |
|
ASTM A 100 |
Standard Specification for Ferrosilicon |
|
ASTM A 483 |
Standard Specification for Silicomanganese |
|
ASTM D 1067 |
Standard Test Methods for Acidity or Alkalinity of Water |
|
ASTM D 1068 |
Standard Test Methods for Iron in Water |
|
ASTM D 1125 |
Standard Test Methods for Electrical Conductivity and Resistivity of Water |
|
ASTM D 1126 |
Standard Test Method for Hardness in Water |
|
ASTM D 1179 |
Standard Test Methods for Fluoride Ion in Water |
|
ASTM D 1193 |
Standard Specification for Reagent Water |
|
ASTM D 1217 |
Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer |
|
ASTM D 1250 |
Standard Guide for Use of the Petroleum Measurement Tables-API Standard: API MPMS Ch.11.1; IP Designation: 200/04 |
|
ASTM D 1266 |
Standard Test Method for Sulfur in Petroleum Products (Lamp Method)-IP Designation: 107/86 |
|
ASTM D 1267 |
Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method) |
|
ASTM D 129 |
Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)-British Standard 4454; IP Designation: 61/99 |
|
ASTM D 1293 |
Standard Test Methods for pH of Water |
|
ASTM D 1298 |
Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method-API Designation: MPMS Chapter 9.1; IP Designation 160/99 |
|
ASTM D 1319 |
Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption-IP Designation: 156/97 |
|
ASTM D 1331 |
Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents |
|
ASTM D 1426 |
Standard Test Methods for Ammonia Nitrogen in Water |
|
ASTM D 1452 |
Standard Practice for Soil Investigation and Sampling by Auger Borings |
|
ASTM D 1475 |
Standard Test Method for Density of Liquid Coatings, Inks, and Related Products |
|
ASTM D 1552 |
Standard Test Method for Sulfur in Petroleum Products (High- Temperature Method) |
|
ASTM D 1613 |
Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
|
ASTM D 1640 |
Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature |
|
ASTM D 1796 |
Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)-API Designation: MPMS Chapter 10.6 |
|
ASTM D 1835 |
Standard Specification for Liquefied Petroleum (LP) Gases |
|
ASTM D 1837 REV A |
Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases |
|
ASTM D 1838 |
Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases |
|
ASTM D 1945 |
Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
|
ASTM D 1946 |
Standard Practice for Analysis of Reformed Gas by Gas Chromatography |
|
ASTM D 2158 |
Standard Test Method for Residues in Liquefied Petroleum (LP) Gases- IP Designation: 317/95 |
|
ASTM D 2216 |
Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
|
ASTM D 2369 |
Standard Test Method for Volatile Content of Coatings |
|
ASTM D 240 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter |
|
ASTM D 2504 |
Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography |
|
ASTM D 2584 |
Standard Test Method for Ignition Loss of Cured Reinforced Resins |
|
ASTM D 2598 |
Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis |
|
ASTM D 2622 |
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
|
ASTM D 2699 REV A |
Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel-IP Designation: 237/87 |
|
ASTM D 2700 REV A |
Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel-IP Designation: 236/87 |
|
ASTM D 2709 |
Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge |
|
ASTM D 2713 |
Standard Test Method for Dryness of Propane (Valve Freeze Method)- IP Designation: 395/98 |
|
ASTM D 2784 |
Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy- Hydrogen Burner or Lamp) |
|
ASTM D 287 |
Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method) |
|
ASTM D 2880 |
Standard Specification for Gas Turbine Fuel Oils |
|
ASTM D 2996 |
Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber- Reinforced Thermosetting-Resin) Pipe |
|
ASTM D 2997 |
Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber- Reinforced Thermosetting-Resin) Pipe |
|
ASTM D 3120 REV A |
Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry |
|
ASTM D 323 REV A |
Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) |
|
ASTM D 3237 |
Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy |
|
ASTM D 3238 |
Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method |
|
ASTM D 3246 |
Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry |
|
ASTM D 3262 |
Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe |
|
ASTM D 3278 |
Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
|
ASTM D 3299 |
Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
|
ASTM D 3338 |
Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
|
ASTM D 3343 |
Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels |
|
ASTM D 3370 REV A |
Standard Practices for Sampling Water from Closed Conduits |
|
ASTM D 3517 |
Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe |
|
ASTM D 3574 |
Standard Test Methods for Flexible Cellular MaterialsSlab, Bonded, and Molded Urethane Foams |
|
ASTM D 3588 |
Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels |
|
ASTM D 3754 |
Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe |
|
ASTM D 3839 |
Standard Guide for Underground Installation of Fiberglass (Glass- FiberReinforced Thermosetting-Resin) Pipe |
|
ASTM D 4024 |
Standard Specification for Machine Made "Fiberglass" (Glass-Fiber- Reinforced Thermosetting Resin) Flanges |
|
ASTM D 4052 |
Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter-X´A6´hNX´A6´hM IP Designation: 365/84(86) |
|
ASTM D 4057 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products-IP Designation: IMPMS (Chapter 8.1) |
|
ASTM D 4059 |
Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography |
|
ASTM D 4084 |
Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
|
ASTM D 4161 |
Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals |
|
ASTM D 4177 |
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products-IP Designation: MPMS Chapter 8.2 |
|
ASTM D 420 |
Standard Guide to Site Characterization for Engineering Design and Construction Purposes |
|
ASTM D 4294 |
Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry |
|
ASTM D 4327 |
Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography |
|
ASTM D 445 |
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)-IP Designation: 71/1/97; British Standard 2000: Part 71:1990 |
|
ASTM D 4629 |
Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection-IP Designation: 379/88 |
|
ASTM D 471 |
Standard Test Method for Rubber PropertyEffect of Liquids |
|
ASTM D 4809 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) |
|
ASTM D 4814 REV B |
Standard Specification for Automotive Spark-Ignition Engine Fuel |
|
ASTM D 4815 |
Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography |
|
ASTM D 482 |
Standard Test Method for Ash from Petroleum Products-IP Designation: 4/96 |
|
ASTM D 4953 REV A |
Standard Test Method for Vapor Pressure of Gasoline and Gasoline- Oxygenate Blends (Dry Method) |
|
ASTM D 512 |
Standard Test Methods for Chloride Ion in Water |
|
ASTM D 516 |
Standard Test Method for Sulfate Ion in Water |
|
ASTM D 5186 |
Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography |
|
ASTM D 5191 REV A |
Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
|
ASTM D 523 |
Standard Test Method for Specular Gloss |
|
ASTM D 524 |
Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products-IP Designation: 14/94 |
|
ASTM D 5291 |
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants |
|
ASTM D 5364 |
Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units |
|
ASTM D 5453 |
Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence |
|
ASTM D 5504 |
Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
|
ASTM D 5599 |
Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection |
|
ASTM D 56 |
Standard Test Method for Flash Point by Tag Closed Cup Tester |
|
ASTM D 5762 |
Standard Test Method for Nitrogen in Petroleum and Petroleum Products bY Boat-Inlet Chemiluminescence |
|
ASTM D 5842 |
Standard Practice for Sampling and Handling of Fuels for Volatility Measurement-API Designation: MPMS 8.4 |
|
ASTM D 5854 |
Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products-Designation: Manual of Petroleum Measurement Standards (MPMS), Chapter 8.3 |
|
ASTM D 613 |
Standard Test Method for Cetane Number of Diesel Fuel Oil-IP Designation: 41/2000 |
|
ASTM D 6299 |
Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance |
|
ASTM D 6667 |
Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence |
|
ASTM D 737 |
Standard Test Method for Air Permeability of Textile Fabrics |
|
ASTM D 808 |
Standard Test Method for Chlorine in New and Used Petroleum Products (Bomb Method) |
|
ASTM D 859 |
Standard Test Method for Silica in Water |
|
ASTM D 86 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure |
|
ASTM D 888 |
Standard Test Methods for Dissolved Oxygen in Water |
|
ASTM D 92 REV A |
Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester-IP Designation: 36/84 (89); AASHTO No.: T48; DIN 51 376 |
|
ASTM D 93 REV A |
Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester-IP Designation: 34/99 |
|
ASTM D 95 |
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation-AASHTO No. T55; API Designation: MPMS Chapter 10.5; IP Designation: 74/82(88) |
|
ASTM D 97 REV A |
Standard Test Method for Pour Point of Petroleum Products-IP Designation: 15/95 |
|
ASTM D 975 |
Standard Specification for Diesel Fuel Oils |
|
ASTM D 976 REV B |
Standard Test Method for Calculated Cetane Index of Distillate Fuels |
|
ASTM E 1 |
Standard Specification for ASTM Liquid-in-Glass Thermometers |
|
ASTM E 145 |
Standard Specification for Gravity-Convection and Forced-Ventilation Ovens |
|
ASTM E 1527 |
Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process |
|
ASTM E 162 REV A |
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source |
|
ASTM E 168 |
Standard Practices for General Techniques of Infrared Quantitative Analysis |
|
ASTM E 220 |
Standard Test Method for Calibration of Thermocouples By Comparison Techniques |
|
ASTM E 29 |
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
|
ASTM E 515 |
Standard Test Method for Leaks Using Bubble Emission Techniques |
|
ASTM E 662 |
Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials |
|
ASTM E 681 |
Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases) |
|
ASTM E 84 |
Standard Test Method for Surface Burning Characteristics of Building Materials |
|
ASTM G 21 |
Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
|
AWWA C950 |
Fiberglass Pressure Pipe |
|
IEEE 516 |
Guide for Maintenance Methods on Energized Power Lines |
|
ISO 10012 |
Measurement Management Systems - Requirements for Measurement Processes and Measuring Equipment-First Edition |
|
ISO 9001 |
Quality Management Systems - Requirements-Third Edition; Supersedes ISO 9002:1994 and ISO 9003:1994 |
|
NACE NO. 2 |
Joint Surface Preparation Standard Near-White Metal Blast Cleaning-Item No. 21066; SSPC SP 10: 1999 |
|
NACE NO. 3 |
Joint Surface Preparation Standard Commercial Blast Cleaning-Item No. 21067; SSPC SP 6 1999 |
|
NACE RP0169 |
Control of External Corrosion on Underground or Submerged Metallic Piping Systems |
|
NACE RP0285 |
Corrosion Control of Underground Storage Tank Systems by Cathodic Protection-Item No. 21030 |
|
NACE TM0169 |
Laboratory Corrosion Testing of Metals |
|
NFPA 1 |
Uniform Fire Code-2006 Edition |
|
NFPA 10 |
Standard for Portable Fire Extinguishers-Errata 10-02-1: 10/24/02 |
|
NFPA 1001 |
Standard for Fire Fighter Professional Qualifications |
|
NFPA 1006 |
Stanard for Rescue Technician Professional Qualifications |
|
NFPA 101 |
Life Safety Code-2006 Edition |
|
NFPA 101A |
Guide on Alternative Approaches to Life Safety |
|
NFPA 101B |
Code for Means of Egress for Buildings and Structures |
|
NFPA 1081 |
Standard for Industrial Fire Bridgade Member Professional Qualifications |
|
NFPA 11 |
Standard for Low-, Medium-, and High-Expansion Foam |
|
NFPA 110 |
Standard for Emergency and Standby Power Systems |
|
NFPA 111 |
Standard on Stored Electrical Energy Emergency and Standby Power Systems |
|
NFPA 11A |
Standard for Medium- and High-Expansion Foam Systems |
|
NFPA 12 |
Standard on Carbon Dioxide Extinguishing Systems |
|
NFPA 1221 |
Standard for the Installation, Maintenance, and Use of Emergency Services Communications Systems-Incorporates NFPA 297 - 1995; Errata 02-1: 02/26/2003; Errata 1221-02-1R: 7/7/2003 |
|
NFPA 12A |
Standard on Halon 1301 Fire Extinguishing Systems |
|
NFPA 13 |
Standard for the Installation of Sprinkler Systems-Errata No. 13-02-1: 2- 19-03; TIA 02-1, TIA 02-2, TIA 02-3: 07/17/2003 |
|
NFPA 130 |
Standard for Fixed Guideway Transit and Passenger Rail Systems |
|
NFPA 13D |
Standard for the Installation of Sprinkler Systems in One- and Two- Family Dwellings and Manufactured Homes-Errata 13D-02-1: 09/04/03 |
|
NFPA 13E |
Recommended Practice for Fire Department Operations in Properties Protected by Sprinkler and Standpipe Systems |
|
NFPA 13R |
Standard for the Installation of Sprinkler Systems in Residential Occupancies up to and Including Four Stories in Height-Errata 13R-02-1: 09/04/03 |
|
NFPA 14 |
Standard for the Installation of Standpipe and Hose Systems |
|
NFPA 15 |
Standard for Water Spray Fixed Systems for Fire Protection-Errata 01-1 2/24/2003; Errata 15-01-2: 7/01/03 |
|
NFPA 1500 |
Standard on Fire Department Occupational Safety and Health Program-TIA 02-1: 7/17/2003 |
|
NFPA 1561 |
Standard on Emergency Services Incident Management System |
|
NFPA 1582 |
Standard on Comprehensive Occupational Medical Program for Fire Departments |
|
NFPA 16 |
Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems |
|
NFPA 1600 |
Standard on Disaster/Emergency Management and Business Continuity Programs |
|
NFPA 1620 |
Recommended Practice for Pre-Incident Planning |
|
NFPA 1670 |
Standard on Operations and Training for Technical Rescue Incidents |
|
NFPA 17 |
Standard for Dry Chemical Extinguishing Systems |
|
NFPA 170 |
Standard for Fire Safety and Emergency Symbols-2006 Edition |
|
NFPA 1710 |
Standard for the Organization and Deployment of Fire Suppression Operations, Emergency Medical Operations, and Special Operations to the Public by Career Fire Departments |
|
NFPA 17A |
Standard for Wet Chemical Extinguishing Systems |
|
NFPA 18 |
Standard on Wetting Agents-2006 Edition |
|
NFPA 1901 |
Standard for Automotive Fire Apparatus |
|
NFPA 1911 |
Standard for Service Tests of Fire Pump Systems on Fire Apparatus |
|
NFPA 1961 |
Standard on Fire Hose |
|
NFPA 1962 |
Standard for the Inspection, Care, and Use of Fire Hose, Couplings, and Nozzles and the Service Testing of Fire Hose |
|
NFPA 1963 |
Standard for Fire Hose Connections |
|
NFPA 1971 |
Standard on Protective Ensemble for Structural Fire Fighting-TIA 00-1: 10/23/2003 |
|
NFPA 1977 |
Standard on Protective Clothing and Equipment for Wildland Fire Fighting |
|
NFPA 1981 |
Standard on Open-Circuit Self-Contained Breathing Apparatus for Fire and Emergency Services |
|
NFPA 1992 |
Standard on Liquid Splash-Protective Ensembles and Clothing for Hazardous Materials Emergencies |
|
NFPA 20 |
Standard for the Installation of Stationary Pumps for Fire Protection |
|
NFPA 204 |
Standard for Smoke and Heat Venting |
|
NFPA 211 |
Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances |
|
NFPA 214 |
Standard on Water-Cooling Towers |
|
NFPA 22 |
Standard for Water Tanks for Private Fire Protection |
|
NFPA 220 |
Standard on Types of Building Construction |
|
NFPA 221 |
Standard for High Challenge Fire Walls, Fire Walls, and Fire Barrier Walls-2006 Edition |
|
NFPA 230 |
Standard for the Fire Protection of Storage |
|
NFPA 232 |
Standard for the Protection of Records |
|
NFPA 24 |
Standard for the Installation of Private Fire Service Mains and Their Appurtenances |
|
NFPA 241 |
Standard for Safeguarding Construction, Alteration, and Demolition Operations 2004 Edition |
|
NFPA 25 |
Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems |
|
NFPA 251 |
Standard Methods of Tests of Fire Resistance of Building Construction and Materials-2006 Edition |
|
NFPA 252 |
Standard Methods of Fire Tests of Door Assemblies |
|
NFPA 255 |
Standard Method of Test of Surface Burning Characteristics of Building Materials-2006 Edition |
|
NFPA 262 |
Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces |
|
NFPA 291 |
Recommended Practice for Fire Flow Testing and Marking of Hydrants |
|
NFPA 30 |
Flammable and Combustible Liquids Code |
|
NFPA 307 |
Standard for the Construction and Fire Protection of Marine Terminals, Piers, and Wharves |
|
NFPA 30A |
Code for Motor Fuel Dispensing Facilities and Repair Garages-TIA 03-1: 7/17/03 |
|
NFPA 30B |
Code for the Manufacture and Storage of Aerosol Products-Errata 02-1: 4/02/2003; |
|
NFPA 31 |
Standard for the Installation of Oil-Burning Equipment |
|
NFPA 318 |
Standard for the Protection of Semiconductor Fabrication Facilities-2006 Edition |
|
NFPA 325 |
Guide to Fire Hazard Properties of Flammable Liquids, Gases, and Volatile Solids (Formerly NFPA 325M)-Out of Print |
|
NFPA 326 |
Standard for the Safeguarding of Tanks and Containers for Entry, Cleaning, or Repair |
|
NFPA 329 |
Recommended Practice for Handling Releases of Flammable and Combustible Liquids and Gases |
|
NFPA 33 |
Standard for Spray Application Using Flammable or Combustible Materials |
|
NFPA 36 |
Standard for Solvent Extraction Plants |
|
NFPA 37 |
Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines |
|
NFPA 385 |
Standard for Tank Vehicles for Flammable and Combustible Liquids |
|
NFPA 403 |
Standard for Aircraft Rescue and Fire-Fighting Services at Airports |
|
NFPA 407 |
Standard for Aircraft Fuel Servicing-TIA 01-1 7/17/03 |
|
NFPA 409 |
Standard on Aircraft Hangars |
|
NFPA 410 |
Standard on Aircraft Maintenance |
|
NFPA 418 |
Standard for Heliports |
|
NFPA 430 |
Code for the Storage of Liquid and Solid Oxidizers |
|
NFPA 45 |
Standard on Fire Protection for Laboratories Using Chemicals |
|
NFPA 471 |
Recommended Practice for Responding to Hazardous Materials Incidents |
|
NFPA 472 |
Standard for Professional Competence of Responders to Hazardous Materials Incidents |
|
NFPA 484 |
Standard for Combustible Metals-2006 Edition |
|
NFPA 496 |
Standard for Purged and Pressurized Enclosures for Electrical Equipment |
|
NFPA 497 |
Recommended Practice for the Classification of Flammable Liquids, Gases, or Vapors and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas |
|
NFPA 499 |
Recommended Practice for the Classification of Combustible Dusts and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas |
|
NFPA 502 |
Standard for Road Tunnels, Bridges and Other Limited Access Highways |
|
NFPA 505 |
Fire Safety Standard for Powered Industrial Trucks Including Type Designations, Areas of Use, Conversions, Maintenance, and Operations-2006 Edition |
|
NFPA 51 |
Standard for the Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes |
|
NFPA 51B |
Standard for Fire Prevention During Welding, Cutting, and Other Hot Work |
|
NFPA 52 |
Vehicular Fuel Systems Code-2006 Edition |
|
NFPA 53 |
Recommended Practice on Materials, Equipment, and Systems Used in Oxygen-Enriched Atmospheres |
|
NFPA 54 |
National Fuel Gas Code-2006 Edition |
|
NFPA 55 |
Standard for the Storage, Use, and Handling of Compressed Gases and Cryogenic Fluids in Portable and Stationary Containers, Cylinders, and Tanks |
|
NFPA 57 |
Liquefied Natural Gas (LNG) Vehicular Fuel Systems Code-TIA 02-1: 10/03/02 |
|
NFPA 58 |
Liquefied Petroleum Gas Code |
|
NFPA 59 |
Utility LP-Gas Plant Code |
|
NFPA 59A |
Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG)-2006 Edition |
|
NFPA 600 |
Standard on Industrial Fire Brigades |
|
NFPA 654 |
Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids-2006 Edition |
|
NFPA 655 |
Standard for Prevention of Sulfur Fires and Explosions |
|
NFPA 68 |
Guide for Venting of Deflagrations |
|
NFPA 69 |
Standard on Explosion Prevention Systems |
|
NFPA 70 |
National Electrical Code 2005 Edition |
|
NFPA 70 |
National Electrical Code 2005 Edition-Errata 12/24/04; TIA 8/18/05 |
|
NFPA 701 |
Standard Methods of Fire Tests for Flame Propagation of Textiles and Films |
|
NFPA 704 |
Standard System for the Identification of the Hazards of Materials for Emergency Response |
|
NFPA 70A |
National Electrical Code Requirements for One-and Two-Family Dwellings |
|
NFPA 70B |
Recommended Practice for Electrical Equipment Maintenance |
|
NFPA 70E |
Standard for Electrical Safety In the Workplace |
|
NFPA 72 |
National Fire Alarm Code-Errata 02-1: 1/30/2003; Errata 72-02-2: 04/16/2003 |
|
NFPA 73 |
Electrical Inspection Code for Existing Dwellings-2006 Edition |
|
NFPA 75 |
Standard for the Protection of Information Technology Equipment-Errata 03-1: 4/21/2003; |
|
NFPA 750 |
Standard on Water Mist Fire Protection Systems |
|
NFPA 76 |
Standard for the Fire Protection of Telecommunications Facilities |
|
NFPA 77 |
Recommended Practice on Static Electricity-Errata:77-00-01 2/13/02 |
|
NFPA 79 |
Electrical Standard for Industrial Machinery |
|
NFPA 80 |
Standard for Fire Doors and Fire Windows |
|
NFPA 801 |
Standard for Fire Protection for Facilities Handling Radioactive Materials |
|
NFPA 805 |
Performance-Based Standard for Fire Protection for Light Water Reactor Electric Generating Plants-Replaces 803 |
|
NFPA 80A |
Recommended Practice for Protection of Buildings from Exterior Fire Exposures |
|
NFPA 82 |
Standard on Incinerators and Waste and Linen Handling Systems and Equipment |
|
NFPA 820 |
Standard for Fire Protection in Wastewater Treatment and Collection Facilities |
|
NFPA 85 |
Boiler and Combustion Systems Hazards Code |
|
NFPA 850 |
Recommended Practice for Fire Protection for Electric Generating Plants and High Voltage Direct Current Converter Stations |
|
NFPA 851 |
Recommended Practice for Fire Protection for Hydroelectric Generating Plants |
|
NFPA 86 |
Standard for Ovens and Furnaces |
|
NFPA 86C |
Standard for Industrial Furnaces Using a Special Processing Atmosphere |
|
NFPA 86D |
Standard for Industrial Furnaces Using Vacuum as an Atmosphere |
|
NFPA 90A |
Standard for the Installation of Air-Conditioning and Ventilating Systems-Errata 02-1 1/02/2003 |
|
NFPA 90B |
Standard for the Installation of Warm Air Heating and Air-Conditioning Systems-2006 Edition |
|
NFPA 91 |
Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate Solids |
|
NFPA 921 |
Guide for Fire and Explosion Investigations |
|
NFPA 92A |
Standard for Smoke-Control Systems Utilizing Barriers and Pressure Differences-2006 Edition |
|
NFPA 92B |
Standard for Smoke Management Systems in Malls, Atria, and Large Spaces |
|
NFPA 96 |
Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations |
|
NFPA 99 |
Standard for Health Care Facilities |
|
NFPA 99C |
Standard on Gas and Vacuum Systems |
|
NFPA VOL 13 |
National Fire Codes Subscription Service Volume 13 Formal Interpretations (Includes Updates Through 96-2) |
|
UL 142 |
UL Standard for Safety Steel Aboveground Tanks for Flammable and Combustible Liquids-Eighth Edition |
|
UL 58 |
UL Standard for Safety Steel Underground Tanks for Flammable and Combustible Liquids-Ninth Edition; Reprint with Revisions Through and Including 07/27/1998 |
|
UL 969 |
UL Standard for Safety Marking and Labeling Systems-Fourth Edition; Reprint with Revisions Through and Including November 30, 2001 |
|
UL 991 |
UL Standard for Safety Tests for Safety-Related Controls Employing Solid-State Devices-Third Edition |